ElecGear 2PC Replacement Battery Pack for PS4 Controller V1-3, 1500mAh Li-ion Rechargeable Battery for Playstation 4 DualShock CUH-ZCT1 Series LIP1522 with Big Plug, Repair Tool Kit Included

Identify DS4 Battery Problem:
1.🔺Are you buying this replacement battery for the problem of ‘Not Charging’? No, this probably is a wrong idea. We strongly suggest you to view ‘JDS charging board’ instead by searching ElecGear listing ID: B07CG71CGC
2.The battery should be replaced when the gaming hours gradually shorten even if it was fully charged
3.Replacing the battery won’t fix a controller that doesn’t charge, doesn’t power on, or drains the energy while not in use. Those problems are usually caused by the charger station, USB cable or JDM motherboard

The replacement Li-ion battery is for PS4 controller. 1500mAh large capacity is 50% more powerful than Sony stock battery. Interchangeable with original LIP1522 of DualShock 4. With built-in battery protection circuit module PMC to prevent over-charging, over-discharge and short circuit. Necessary repair tool kit included

Note on Compatibility:
1.PlayStation 4 wireless controllers come with the same LIP1522 batteries, however the connectors can be different – Big PH2.0 or Small ZH1.5
2.This listing is ✅Big Plug for older PS4 DualShock 4 made in 2015 or before with No light bar inside the touch pad: CUH-ZCT1E, CUH-ZCT1H, CUH-ZCT1H/B, CUH-ZCT1H/R and CUH-ZCT1U
3.Choose ❌Small Plug for newer CUH-ZCT2 series made in 2016 or later with light bar
4.We strongly suggest you to check the plug before ordering

Note on Safety:
Do not expose the battery to fire or excessive heat. Do not open, disassemble the battery. This may cause injury and destroy the battery

Specifications:
Model: EL-3450
Part Num.: LIP1522-B
Battery Type: Lithium Ion Rechargeable
Standard Volt: 3.7V
Capacity: 1500mAh, 5.55Wh
Connector: PH2.0
Weight: 28gram
Dimension: 52x34x8mm

Packaging:
2*Battery (✅Big Plug)
1*PH000 Screwdriver
1*Plastic Spudger

[What’s this] – Brand-new, 3.7V 1500mAh, Replacement Li-ion battery for PS4 controller Version 1-3. The 3rd party battery has 50% more energy than Sony stock battery. Interchangeable with original LIP1522 with big connector found in DualShock 4 CUH-ZCT1 series. Comply with Sony standard and with built-in battery protection circuit module PMC to prevent over-charging, over-discharge and short circuit. Necessary repair tool kit included in the package
[Which plug] – PlayStation 4 wireless controllers come with the same LIP1522 batteries, however the connectors are different – ✅Big PH2.0 or ❌Small ZH1.5. This big plug fits PS4 DualShock 4 made in 2015 or before with No light bar inside the touch pad: CUH-ZCT1E, CUH-ZCT1H, CUH-ZCT1H/B, CUH-ZCT1H/R or CUH-ZCT1U. Please choose small plug for CUH-ZCT2 series with light bar. We strongly suggest you to check the plug before ordering
[When to Replace] – The battery should be replaced when the gaming hours gradually shorten even if it was fully charged. (🔺Be noticed: Replacing the battery won’t fix a controller that doesn’t power on, doesn’t charge, or drains the energy while not in use. Those problems are usually caused by charger station, cable or motherboard. We strongly suggest you to view JDS USB charging board for ‘not charging’ problem by searching ElecGear listing ID: B07CG71CGC.)
[How to Install] – Replacing a DS4 battery is relative easy. Dismantle the controller with included precision screwdriver and opening pry tool. Swap the new battery pack for the problem one. No soldering and no wires cutting. Plug and play installation can be done within 10min. Online replacement tutorial provided on our tech support website
[What’s in Package] – 2*EL-3450-B Lithium Ion Rechargeable Battery (✅Big Plug PH2.0, 3.7Volt, 5.55Wh, Dimension: 52x34x8mm, Weight: 28gram, Industrial package in ESD bag); 1*PH000 Phillips Screwdriver; 1*Plastic Spudger. (🔺Be noticed: Do not expose the battery to fire or excess heat. Do not open, disassemble the battery. This may cause injury and will destroy the battery.)